<video id="tk5tb"><ins id="tk5tb"></ins></video>
<font id="tk5tb"></font>

    <rt id="tk5tb"><nav id="tk5tb"></nav></rt>
    <video id="tk5tb"><nav id="tk5tb"></nav></video>
    <code id="tk5tb"><noscript id="tk5tb"><blockquote id="tk5tb"></blockquote></noscript></code>
  1. <track id="tk5tb"><table id="tk5tb"></table></track>
    1. <bdo id="tk5tb"><pre id="tk5tb"></pre></bdo>

      <b id="tk5tb"><dl id="tk5tb"><blockquote id="tk5tb"></blockquote></dl></b>
      <rp id="tk5tb"></rp>
    2. <b id="tk5tb"><samp id="tk5tb"><wbr id="tk5tb"></wbr></samp></b>


      • 手機號碼:+86 13662603519
      • 電話:+86 755-23063852 13662603519
      • 郵箱:master@www.sbp-glass.com, hwj981@126.com



      國產替代VG95234 20-15S/P 卡扣式軍標航空插頭

      VG95234系列與MIL-DTL-5015連接器基本相同,但具有改進的連接系統。 G95234系列采用一個強制性、快速咬合、三點式反向卡銷替換MIL-DTL-5015 內使用的接合螺紋。 VG95234系列的殼體尺寸、接頭布置、接頭及性能特征與MIL-DTL-5015螺紋連接器基本相同,但兩個系列連接器無法相互插合。插針布局的排列超過180種,連接線路從1到85路,插針電流可高達150安培。采用MIL-DTL-5015標準設計,允許電流插針與信號插針混合布局,或者僅布置一種插針,即電流插針或信號插針。這些連接器完全密封,耐潮濕、冷凝、振動及閃絡。當連接器的兩半插合后,后部密封扣環扣緊在前端界面密封上,以實現完全密封。

      Domestic replacement VG95234 20-15s /P clasp military standard aviation plug

      The VG95234 series is basically the same as the mil-dtl-5015 connector, but with an improved connection system.The G95234 series replaces the mating threads used in mil-dtl-5015 with a mandatory, quick bite, three-point reverse pin.VG95234 series of the shell size, joint layout, joint and performance characteristics and mil-dtl-5015 thread connectors are basically the same, but the two series of connectors can not be mutually inserted.The pins can be arranged in more than 180 ways, connected from 1 to 85 lines, and the pin current can be up to 150 amperes.The standard design of mil-dtl-5015 is adopted to allow mixed layout of current insertion needle and signal insertion needle, or only one type of insertion needle, namely current insertion needle or signal insertion needle.These connectors are completely sealed against moisture, condensation, vibration and flashover.When the two halves of the connector are inserted and closed, the rear sealing ring is fastened on the front interface to achieve complete sealing.